+91 9718383333


OUR PRODUCTS:



Valves


Product Category : Spares / Blasting /Sand Blast (Air Operated)  





⚫️ EXHAUST VALVE:

🔸As the name states, Exhaust valve acts as an air vent for the blasting machine. 

🔸When blasting is stopped, the valve opens automatically and the air is vented out. Thus, the machine is instantly depressurized through the exhaust valve.

🔸They are fabricated from either Cast Iron or Aluminium, depending upon the usage.

🔸Due to their flawless performance, robust quality and compact design, our valves are preferred over others

🔸SILENCER MOST RECOMMENDED WITH EXHAUST VALVE.

⚫️ DUMP VALVE:

🔸Used in Low Pressure Portable Abrasive Blasting Machine/ Equipments.

⚫️ MUSHROOM VALVE:

🔸Available in following sizes 19mm, 25mm.

🔸It is used for automatic tank sealing. When the switch is in ON position, it automatically seals the pot and thus maintaining pressure. 

🔸When machine is on off state it depressurize the tank and facilitate refilling of abrasive media.

🔸They are used in both portable abrasive blasting machine and pressure blasting cabinets.

🔸For portable blasters, we use high quality MS and for PB machines we use aluminium body.

🔸O Rings for Mushroom Valve available as Ready Stock.

⚫️ PINCH VALVE:

🔸Pinch valve is a control valve which uses pinching effect to obstruct abrasive media flow. 

🔸The valve is fitted with a rubber sleeve and on top of the pinch valve body a manual hand wheel is provided for customised regulation. It is fabricated from Cast iron.

🔸Rubber Sleeves can be easily and economically replaced when they wear out. - Available as Ready Stock.

🔸On special request, we supply pinch valves with cast aluminium body.

SCROLL BELOW FOR VIEWING MORE IMAGES. ALL AVAILABLE AS READY STOCK!!