AIRLESS HANGER TYPE SHOT BLASTING MACHINE
Our Airless Hanger Type Shot Blasting Machine can be tailored according to your requirement & component/ job size.
The number of Blast Wheels varies according to the job size for the wide variety of workpieces for large production output in terms of Surface treatment.
The overhead conveyor carries the job in & out of the Blasting Cabinet where a number of Blast Wheels are located depending upon the type of the job for attaining homogenous finish.
The Machine consists of the following:
- Blast Wheel(s)
- Over Head Conveyor
- Media Recovery System
- Bucket Elevator
- Screw Conveyor
- Rotary Screen Separator
- Dust Collector etc.
TECHNICAL SPECIFICATIONS:
| Model Name | Envelop Size (Dia x Height) | No. Of Blast Wheel |
Shot Flow Rate (Kg./Wheel/Hour) |
Load Carrying Capacity (Kg.) | Wheel Size & Motor (HP) | Total Power Required (HP) |
| ASH-1 | 600 X 750 | 2 | 3000 | 300 | 12 1/2"x 5 | 14.5 |
| ASH-2 | 600 X 1000 | 2 | 3000 | 300 | 12 1/2"x 5 | 14.5 |
| ASH-3 | 600 X 1000 | 2 | 5000 | 300 | 12 1/2"x 7.5 | 22.5 |
| ASH-4 | 750 X 750 | 2 | 3000 | 300 | 12 1/2"x 5 | 14.5 |
| ASH-5 | 750 X 750 | 2 | 5000 | 300 | 12 1/2"x 7.5 | 22.5 |
| ASH-6 | 750 X 1000 | 2 | 3000 | 300 | 12 1/2"x 5 | 16.5 |
| ASH-7 | 750 X 1000 | 2 | 5000 | 300 | 12 1/2"x 7.5 | 23.5 |
| ASH-8 | 1000 X 1200 | 2 | 5000 | 300 | 12 1/2"x 7.5 | 23.5 |
